Home / Products / Details / Fan2558mp12x
FAN2558MP12X
LDO Voltage Regulators 180ma Low Volt CMOS LDO
| Product Attribute | Attribute Value | Select |
|---|---|---|
| Manufacturer | onsemi | |
| Product Category | LDO Voltage Regulators | |
| RoHS | Details | |
| Mounting Style | SMD/SMT | |
| Package / Case | MLP-6 | |
| Output Voltage | 1.2 V | |
| Output Current | 180 mA | |
| Number of Outputs | 1 Output | |
| Polarity | Positive | |
| Quiescent Current | 100 uA | |
| Input Voltage - Min | 2.7 V | |
| Input Voltage - Max | 5.5 V | |
| Output Type | Fixed | |
| Minimum Operating Temperature | - 40 C | |
| Maximum Operating Temperature | + 125 C | |
| Dropout Voltage | 400 mV | |
| Series | FAN2558 | |
| Packaging | Reel | |
| Packaging | Cut Tape | |
| Packaging | MouseReel | |
| Brand | onsemi / Fairchild | |
| Dropout Voltage - Max | 400 mV | |
| Height | 0.95 mm | |
| Length | 2 mm | |
| Line Regulation | 0.3 % / V | |
| Load Regulation | 2.5 % | |
| Product Type | LDO Voltage Regulators | |
| Factory Pack Quantity: Factory Pack Quantity | 3000 | |
| Subcategory | PMIC - Power Management ICs | |
| Voltage Regulation Accuracy | 1 % | |
| Width | 2 mm | |
| Unit Weight | 0.000353 oz |
| USHTS | 8542390060 |
| CNHTS | 8542399000 |
| CAHTS | 8542310000 |
| KRHTS | 8542311000 |
| TARIC | 8542319000 |
| MXHTS | 8542310399 |
| ECCN | EAR99 |
TPS7B70-Q1 LDO Linear Regulators
Texas Instruments TPS7B70-Q1 LDO Linear Regulators are 300mA, low-dropout (LDO) linear regulators that operate from an automotive battery. These devices have only 19µA of quiescent current at light loads. This makes the TPS7B70-Q1 an excellent selection to supply power to always-on components, such as microcontrollers (MCUs) and controller area network (CAN) transceivers. The input voltage range of the TPS7B70-Q1 extends through 40V. This voltage helps the device withstand transient conditions, such as load-dump. The device also has a power good (PG) pin to tell the system when the output voltage is in regulation. To achieve the necessary operation, you can adjust the PG threshold voltage and delay. The threshold voltage of the PG signal is adjusted through external resistors. Adjust the delay with an external capacitor.
PRODUCT CATEGORIES
FEATURED PRODUCTS
onsemi / Fairchild
FOD4208SDV
Triac & SCR Output Optocouplers Random Phase Triac Snubberless
4N33TVM
Transistor Output Optocouplers Photodarlington
1N3595TR
Small Signal Switching Diodes Hi Conductance Fast
FOD817AS
Transistor Output Optocouplers Opto Phototransistor Output SM-DIP4
74LCXH16244MTDX
Buffers & Line Drivers 16 Bit Buf/Line Drv
MOC3021SM
Triac & SCR Output Optocouplers SO-6 NON-ZERO TRIAC
MOC3061SR2M
Triac & SCR Output Optocouplers 6Pin600V Optocoupler Zero Cross Triac Dr
74LCX02MX
Logic Gates Qd 2-Input NOR Gate
FQD5P20TM
MOSFETs 200V P-Channel QFET
BC33725TFR
Bipolar Transistors - BJT NPN Si Transistor Epitaxial
