Home / Products / Details / Tps259822onrger
TPS259822ONRGER
Hot Swap Voltage Controllers 2.7-V to 24-V 2.7-m ohm 15-A eFuse with A 595-TPS259822ONRGET
| Product Attribute | Attribute Value | Select |
|---|---|---|
| Manufacturer | Texas Instruments | |
| Product Category | Hot Swap Voltage Controllers | |
| RoHS | Details | |
| Product | Controllers & Switches | |
| Current Limit | 2 A to 15 A | |
| Supply Voltage - Max | 24 V | |
| Supply Voltage - Min | 2.7 V | |
| Number of Channels | 1 Channel | |
| Minimum Operating Temperature | - 40 C | |
| Maximum Operating Temperature | + 125 C | |
| Mounting Style | SMD/SMT | |
| Package / Case | VQFN-24 | |
| Packaging | Reel | |
| Packaging | Cut Tape | |
| Packaging | MouseReel | |
| Power Fail Detection | Yes | |
| Brand | Texas Instruments | |
| Moisture Sensitive | Yes | |
| Product Type | Hot Swap Voltage Controllers | |
| Series | TPS25982 | |
| Factory Pack Quantity: Factory Pack Quantity | 3000 | |
| Subcategory | PMIC - Power Management ICs |
| USHTS | 8542390090 |
| ECCN | EAR99 |
TPS25982 Smart eFuses
Texas Instruments TPS25982 Smart eFuse is a highly integrated circuit protection and power management solution in a small 4mm × 4mm QFN package. The TPS25982 features an accurate load current monitor and adjustable transient fault management. The devices offer a robust defense against overloads, short circuits, voltage surges, and excessive inrush current. Overvoltage events are limited by internal cutoff circuits with multiple device options to choose the overvoltage threshold.
LM5060 High-Side Protection Controllers
Texas Instruments LM5060 High-Side Protection Controllers with Low Quiescent Current offers intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. The constant rise time of the output voltage results from the inrush current control. Both an Input UVLO (with hysteresis) and a programmable input OVP are provided, with an enable input offering a remote on or off control. The initial start-up VGS fault detection delay time, the transition VDS fault detection delay time, and the continuous over-current VDS fault detection delay time is programmed from a single capacitor. The MOSFET is latched off until either the enable input, or the UVLO input is toggled low and then high when a detected fault condition persists longer than the allowed fault delay time.
PRODUCT CATEGORIES
FEATURED PRODUCTS
Texas Instruments
SN74HCS74QPWRQ1
Flip Flops Automotive Schmitt-t rigger input dual D-
OPA2156IDGKR
Operational Amplifiers - Op Amps Low noise (3-nV/vHz a.10kHz) high speed A 595-OPA2156IDGKT
TPS259827ONRGER
Hot Swap Voltage Controllers 2.7-V to 24-V 2.7-m ohm 15-A eFuse with A 595-TPS259827ONRGET
LP3470A463DBVR
Supervisory Circuits Ultra-low-power acti ve-low reset IC with
TPS7A2518DRVR
LDO Voltage Regulators 300-mA 18-V ultra- low-IQ high-accurac
BQ298012RUGT
Battery Management High-side protector for single-cell li-i A 595-BQ298012RUGR
LP3470A263DBVR
Supervisory Circuits Ultra-low-power acti ve-low reset IC with
LP3470A308DBVR
Supervisory Circuits Ultra-low-power acti ve-low reset IC with
SN74HCS04QDRQ1
Buffers & Line Drivers Automotive 6-ch 2-V to 6-V low power in
ADC12DJ3200ZEGT
Analog to Digital Converters - ADC 12-bit dual 3.2-GSP S or single 6.4-GSPS A 595-ADC12DJ3200ZEG
